search search
Close Search

No Search Result

Contact Us Contact

Connect with us by clicking on one of the following options.

Visit Contact Page
0 Cart Cart

Arrestek brand of Protection System provides one-stop-solution for Earthing and Lightening protection.

The protection system includes risk assessment for calculating protection level of structures and on-site soil resistivity survey, ground resistance measurement and earthing calculations.

Arrestek

Arrestek

Arrestek brand of Protection System provides one-stop-solution for Earthing and Lightening protection. The protection system includes risk assessment for calculating protection level of structures and on-site soil resistivity survey, ground resistance measurement and earthing calculations.

Filter Product
Clear
Early Streamer Emission Customizable
  • Add to
    Add to list

Early Streamer Emission

It Provides Active Lightning Protection Solution with High End ratings of protection radius 107m at 5m height, ΔT 60μsec

Learn More Learn More
Free Standing Air Termination Customizable
  • Add to
    Add to list

Free Standing Air Termination

Free Standing Air Rods consisting of air rod, support frame and concrete base

Learn More Learn More
Air Rods Customizable
  • Add to
    Add to list

Air Rods

Conventional Air Terminal Rod used on highest point of elevated structures to captures maximum lightening strikes

Learn More Learn More
Strike Pad Customizable
  • Add to
    Add to list

Strike Pad

Used where it is not possible to install conductors on roofs or side of buildings. A typical application would be on roof of a car park where the conductor is laid underneath the tarmac and strike pads fitted on top.

Learn More Learn More
Air Terminal Base and Saddles Customizable
  • Add to
    Add to list

Air Terminal Base and Saddles

Support to air terminal rod and electrical connection between Air Rod and Down Conductor

Learn More Learn More
Rod Brackets and Couplings Customizable
  • Add to
    Add to list

Rod Brackets and Couplings

Support to Air terminal rod on side / wall mounting

Learn More Learn More
Bare Copper Tape Customizable
  • Add to
    Add to list

Bare Copper Tape

High conductivity annealed bare copper tape

Learn More Learn More
Tinned Copper Tape Customizable
  • Add to
    Add to list

Tinned Copper Tape

Used as down conductors

Learn More Learn More
PVC Copper Tape Customizable
  • Add to
    Add to list

PVC Copper Tape

Used as down conductors

Learn More Learn More
Hard Drawn Copper Bar Customizable
  • Add to
    Add to list

Hard Drawn Copper Bar

High conductivity hard drawn copper bar

Learn More Learn More
Aluminium Tape Customizable
  • Add to
    Add to list

Aluminium Tape

Used as down conductors

Learn More Learn More
Bare Stranded Copper Conductor Customizable
  • Add to
    Add to list

Bare Stranded Copper Conductor

Provides least resistance path from lightening fault currents to ground earth pit

Learn More Learn More
PVC Covered Stranded Copper Conductor Customizable
  • Add to
    Add to list

PVC Covered Stranded Copper Conductor

Protection against shock while carrying fault currents of bare conductors

Learn More Learn More
Bare Solid Conductor Customizable
  • Add to
    Add to list

Bare Solid Conductor

Provides least resistance path from lightening fault currents to ground earth pit

Learn More Learn More
D.C.Tape Clip – Tape Type Customizable
  • Add to
    Add to list

D.C.Tape Clip – Tape Type

Support to down conductor tape, it is rigid to withstand lightening stresses, thermal expansion and contraction of conductor tapes

Learn More Learn More
Tape Clip – Tape Type Customizable
  • Add to
    Add to list

Tape Clip – Tape Type

Support to down conductor tape, it is rigid to withstand lightening stresses, thermal expansion and contraction of conductor tapes

Learn More Learn More
Non Metallic D.C. Tape Clip Customizable
  • Add to
    Add to list

Non Metallic D.C. Tape Clip

Support to PVC insulated tape, it is rigid to withstand mechanical and lightening stresses, thermal expansion and contraction of conductor tapes

Learn More Learn More
Heavy Duty Conductor Saddle Customizable
  • Add to
    Add to list

Heavy Duty Conductor Saddle

Support to solid or stranded copper conductors

Learn More Learn More
One Hole Clip Customizable
  • Add to
    Add to list

One Hole Clip

Supports round conductors on flat surfaces

Learn More Learn More
Back Plate Holdfast Clamp Customizable
  • Add to
    Add to list

Back Plate Holdfast Clamp

For installation of tapes / conductors to be secured away from walls

Learn More Learn More
Square Clamp - Tape To Conductor Customizable
  • Add to
    Add to list

Square Clamp - Tape To Conductor

For cross joints between tapes and round conductors

Learn More Learn More
Square Tape Clamp (Type 1) Customizable
  • Add to
    Add to list

Square Tape Clamp (Type 1)

Supporting or fixing 4-Way connections

Learn More Learn More
Square Conductor Clamp - Type 2 Customizable
  • Add to
    Add to list

Square Conductor Clamp - Type 2

Supporting or fixing 4-way connection of round conductors

Learn More Learn More
Self Adhesive D.C. Tape Clip Customizable
  • Add to
    Add to list

Self Adhesive D.C. Tape Clip

With an adhesive base and assembled with non-metallic DC Tape Clip

Learn More Learn More
Tee Clamp Customizable
  • Add to
    Add to list

Tee Clamp

Low resistance to tee joints in solid circular conductor networks

Learn More Learn More
Jointing Clamp Customizable
  • Add to
    Add to list

Jointing Clamp

Low resistance parallel joints in solid circular conductor networks

Learn More Learn More
Plate Test Clamp Customizable
  • Add to
    Add to list

Plate Test Clamp

Supporting 4-way connection on down conductor and low resistant connection between overlapping conductors

Learn More Learn More
Bi-Metallic Connector Customizable
  • Add to
    Add to list

Bi-Metallic Connector

Join aluminium and copper tapes / cables together

Learn More Learn More
Interface Test Clamp Customizable
  • Add to
    Add to list

Interface Test Clamp

Low resistant connection and disconnection between overlapping conductors

Learn More Learn More
Screwdown Test Clamp Customizable
  • Add to
    Add to list

Screwdown Test Clamp

Disconnection joint between down conductor system with 4-way connection and earthing system

Learn More Learn More
Earth Boss Customizable
  • Add to
    Add to list

Earth Boss

Made from SS304/SS316 material to get earth connection points on steel structures

Learn More Learn More
Watermain Pipe Bond Customizable
  • Add to
    Add to list

Watermain Pipe Bond

Bonding metallic water main pipes and copper tapes to earthing system

Learn More Learn More
Rain Water Pipe Bond Customizable
  • Add to
    Add to list

Rain Water Pipe Bond

Bonding metallic rain water pipes and tapes to earthing system

Learn More Learn More
Flexible Braid Customizable
  • Add to
    Add to list

Flexible Braid

Bonding doors, metal gates, etc.

Learn More Learn More
Tower Earth Clamp Customizable
  • Add to
    Add to list

Tower Earth Clamp

Bonding copper round conductors to steel surfaces

Learn More Learn More
Concrete Earth Pit Customizable
  • Add to
    Add to list

Concrete Earth Pit

Load rated to 3500 Kgs. It facilitates periodic inspection of connections for corrosion and regular maintenance to ensure safety of personnel and equipment from earth fault currents and the high currents injected into earth provided by a lightning protection system.

Learn More Learn More
B Bond Clamp Customizable
  • Add to
    Add to list

B Bond Clamp

Bonding copper tapes to steel surfaces

Learn More Learn More
Light Weight Inspection Pit Customizable
  • Add to
    Add to list

Light Weight Inspection Pit

Load rated to 5000 Kgs. Manufactured from high-performance, UV stable and chemically resistant polymer with either polymer or concrete lid to suit the application.

Learn More Learn More
Pipe Clamp (Type 1) Customizable
  • Add to
    Add to list

Pipe Clamp (Type 1)

Bonding round conductors to pipes

Learn More Learn More
Copper Bonded Earth Rod Customizable
  • Add to
    Add to list

Copper Bonded Earth Rod

99.9% cure Copper electrolytically bonded to low carbon steel cores. Externally threaded/Unthreaded Copper Bonded Earth Rods are manufactured from a high tensile strength low carbon steel core with pure electrolytic copper molecularly bonded to its surface for a thickness upto 254 micron. Driving Studs are used as impact bearing head when deep driving of earth electrode is required. Couplers are used to combine two/more earth rods.

Learn More Learn More
Solid Copper Earth Rod Customizable
  • Add to
    Add to list

Solid Copper Earth Rod

Resistant to corrosion. Manufactured from high conductivity hard drawn copper with rolled threads. The function of earth electrode is to dissipate fault currents to the general mass of earth. Solid Copper Earth rods are used in protective earthing of commercial and industrial buildings by dispersing the lightning flashes and fault currents of distribution to the earth.

Learn More Learn More
Stainless Steel Earth Rod Customizable
  • Add to
    Add to list

Stainless Steel Earth Rod

Resistant to galvanic corrosion. Stainless Steel Earth Rods are used in protective earthing of commercial and industrial buildings by dispersing lightning flashes and fault currents of distribution to the earth.

Learn More Learn More
Split Connector Clamp Customizable
  • Add to
    Add to list

Split Connector Clamp

Direct connection of stranded cables lugs to earth rods and suitable for unthreaded / threaded rods

Learn More Learn More
Solid Copper Earth Plate Customizable
  • Add to
    Add to list

Solid Copper Earth Plate

Suitable for corrosive soil conditions like soil with salt and moisture. Solid Earth Plate is ideally suited for soil conditions which are very corrosive due to high salt and moisture content. Copper earth plates are used as grounding electrodes in places where deep driving of grounding rod is not possible.

Learn More Learn More
Copper Earth Lattice Customizable
  • Add to
    Add to list

Copper Earth Lattice

Used where touch and step potential cause problems. Copper earth lattices are used as grounding electrodes in places where deep driving of grounding rod is not possible. They are used in grounding of installations such as telecommunication towers. They are a preferred option for installation where touch and step potential could cause a problem

Learn More Learn More
Bentonite Moisture Retaining Clay Customizable
  • Add to
    Add to list

Bentonite Moisture Retaining Clay

Used as Earth Electrode Backfill Compound for reducing soil resistivity. Bentonite moisture retaining clay is used to lower the resistance to earth by providing ground enhancement and effectively reducing the resistance between soil and earth electrode (such as copper earth rod or earth mats). This inherent ability to absorb and retain rainwater increases the electrical conductivity of the earthing compound in positive correlation to local climatic conditions, specifically average rainfall levels. Typically, the compound has 3 ohms resistivity level and is a cost-efficient material for backfill of earth electrodes and improving performance when it is physically impossible to drive the earth rods deeper underchallenging ground conditions such as rocks, granite, etc.

Learn More Learn More
Backfill Earth Enhancing Compound with Pre-Mixed Concrete Customizable
  • Add to
    Add to list

Backfill Earth Enhancing Compound with Pre-Mixed Concrete

Used as Earth Electrode Backfill Compound for reducing soil resistivity. Backfill Earth Enhancing Compound with Pre-Mixed Concrete enables electrical earthing system designers and installers to achieve permanent, stable and low resistance earthing solutions, even in difficult ground conditions when used as a backfill to enhance the effect of copper earth electrodes or earth rods. It is a granulated electrically conductive aggregate which replaces sand in mixes with cement, thereby providing electrically conductive concrete.

Learn More Learn More
Earth Bar Customizable
  • Add to
    Add to list

Earth Bar

Provides common earth points. Earth Bars are made of High Conductivity hard drawn ETP Grade Copper. They are pre-drilled with M10 holes to facilitate/bond multiple connections to main electrical rooms, Genset & Tx Rooms. The Earth Bars are provided as a complete assembly mounted on pre-drilled UPVC channel base with spacers manufactured from Specially Filled & Reinforced Polypropylene Compound. Swan-Neck accessory is used to facilitate connection to the main earth bar.

Learn More Learn More
Earth Bar with Single Disconnecting Link Customizable
  • Add to
    Add to list

Earth Bar with Single Disconnecting Link

Available with Single Disconnecting Link for isolation for testing purpose. Earth Bars are made of High Conductivity hard drawn ETP Grade Copper. The Earth Bars are pre-drilled with M10 holes to facilitate/bond multiple connections to main electrical rooms, Genset & Tx Rooms. Earth Bars with swan neck disconnecting link are provided as a complete assembly mounted on pre-drilled UPVC channel base with spacers manufactured from Specially Filled & Reinforced Polypropylene Compound.

Learn More Learn More
Rod to Tape Clamp (Type A) Customizable
  • Add to
    Add to list

Rod to Tape Clamp (Type A)

Provides secure connection between down conductor tape and earth rod. Used for providing a secure connection between down conductor cable and earth rod.

Learn More Learn More
Rod to Cable Clamp (Type G) Customizable
  • Add to
    Add to list

Rod to Cable Clamp (Type G)

Provides a secure connection between round conductor and earth rod. Used for providing a secure connection between down conductor cable and the earth rod.

Learn More Learn More
U-Bolt : Single Plate Type For Horizontal Flat Tape (Type “E”) Customizable
  • Add to
    Add to list

U-Bolt : Single Plate Type For Horizontal Flat Tape (Type “E”)

Provides secure connection between horizontal tape and earth rod. Used for providing a secure connection between horizontal tape and earth rod. The assembly consists of a one copper alloy body used for firm clamping of tape. The tape is drilled to suit the diameter of U-bolt and clamped by means of phosphor bronze fasteners.

Learn More Learn More
U-Bolt : Double Plate Type For Vertical Stranded Cable Type (Type GUV) Customizable
  • Add to
    Add to list

U-Bolt : Double Plate Type For Vertical Stranded Cable Type (Type GUV)

Provides secure connection between vertical stranded cable and earth rod. Used for providing a secure connection between down conductor vertical stranded cable and earth rod. The assembly consists of two copper alloy plates used for firm clamping of solid round or stranded conductor. U-bolt performs the function of holding rod/rebar and stranded cable together.

Learn More Learn More
U-Bolt : Double Plate Type Vertical Flat Tape (Type “E”) Customizable
  • Add to
    Add to list

U-Bolt : Double Plate Type Vertical Flat Tape (Type “E”)

Provides secure connection between vertical tape and steel reinforcement bar. U-bolt Clamps- Double Plate Type is used for providing a secure connection between the vertical tape and steel reinforcement bar. The assembly consists of two copper alloy plates used for firm clamping of the tape. U-bolt performs the function of holding the rod/rebar and conductor tape together.

Learn More Learn More
Rebar Clamps Customizable
  • Add to
    Add to list

Rebar Clamps

Provides secure connection between down conductor cable and reinforcing bar, steam pipes, hand rails etc. Used for providing a secure connection between down conductor cable and reinforcing bar, steam pipes, handrails, etc.

Learn More Learn More
Hammerlock Customizable
  • Add to
    Add to list

Hammerlock

Provides high conductivity permanent connection between ground rod to conductor. Provides an irreversible connection between earth rods and down conductor. It is manufactured from high conductivity copper, quick and easy to install and requires only a hammer.

Learn More Learn More
Test Clamps Customizable
  • Add to
    Add to list

Test Clamps

Provides low resistance connection and disconnection between overlapping conductors. Provides an effective low resistance connection and disconnection between overlapping tape / strip conductors.

Learn More Learn More
Earth Points with Prewelded Tail Customizable
  • Add to
    Add to list

Earth Points with Prewelded Tail

Direct connection to earth or down conductors or pre-welded tail for connection of internal rebar arrangement with mechanical clamps. Used for direct connection to earth conductors or down conductors. Earth points enable connection to internal rebar arrangement via mechanical clamps as per BS EN 1982:2009 & BS 7430

Learn More Learn More
Denso Tape Customizable
  • Add to
    Add to list

Denso Tape

Protection from corrosion of buried or exposed pipes, rods, cables, valves and other metal fittings. Highly resistant to mineral acids, alkalis, salts and micro – organism and highly impermeable to water and water vapor and gases. Used for protection of buried or exposed pipes, rods, cables, valves from metal fittings from corrosion.

Learn More Learn More
Earth Bar with Twin Disconnecting Link Customizable
  • Add to
    Add to list

Earth Bar with Twin Disconnecting Link

Available with Double Disconnecting Link for isolation for testing purpose. Earth Bars with Double Disconnecting Link is made of High Conductivity hard drawn ETP Grade Copper. Earth Bars are pre-drilled with M10 holes to facilitate/bond multiple connections to main electrical rooms, Genset & Tx Rooms. Earth Bars with swan neck disconnecting link are provided as a complete assembly mounted on a pre-drilled UPVC channel base with spacers manufactured from Specially Filled & Reinforced Polypropylene Compound.

Learn More Learn More
Disconnecting Link Customizable
  • Add to
    Add to list

Disconnecting Link

Provides temporary break to allow inspection and testing of earth electrodes. Disconnecting Link is made of High Conductivity hard drawn ETP Grade Copper used for testing purpose for different electrical rooms, equipment earthing, etc. Swan neck disconnecting link is provided as a complete assembly mounted on pre-drilled UPVC channel base with spacers manufactured from Specially Filled & Reinforced Polypropylene Compound.

Learn More Learn More
Telecom Earth Bar Customizable
  • Add to
    Add to list

Telecom Earth Bar

Provides common grounding point within the telecommunications room and located on data room walls. Telecommunication grounding earth bar is manufactured according to TIA 607C: 2015. The grounding earth bar provides a common grounding point within the telecommunications room and is typically located on walls within a data room.

Learn More Learn More
Secondary Earth Bar Customizable
  • Add to
    Add to list

Secondary Earth Bar

Used for bonding with sub distribution boards. Secondary Telecom earth bar is manufactured according to TIA 607C: 2015. The grounding earth bar provides a common grounding point within the telecommunications room and typically located on walls within a data room.

Learn More Learn More
3 Shape Customizable
  • Add to
    Add to list

3 Shape

Provides permanent crimped connection between conductor to conductor and conductor to earth rod. 3 Shape Connectors are made of high conductivity ETP Garde Copper providing irreversible crimped connection between conductor to conductor or conductor to earth rod. It is suitable for direct burial application and marked with conductor size and die index for easy identification.

Learn More Learn More
6 Shape Customizable
  • Add to
    Add to list

6 Shape

Provides permanent crimped connection between conductor to rebar and conductor to earth rod. 6 Shape Connectors are made of high conductivity ETP Garde Copper providing irreversible crimped connection between conductor to conductor or conductor to earth rod. It is suitable for direct burial application and marked with conductor size and die index for easy identification.

Learn More Learn More
8 Shape Customizable
  • Add to
    Add to list

8 Shape

Provides permanent crimped connection between conductor to conductor and conductor to earth rod. 8 Shape Connectors are made of high conductivity ETP Garde Copper providing irreversible crimped connection between conductor and earth rod. It is suitable for direct burial application and marked with conductor size and die index for easy identification.

Learn More Learn More
6 to 6 Cross Grid Customizable
  • Add to
    Add to list

6 to 6 Cross Grid

Provides permanent crimped connection between conductor to conductor and conductor to earth rod. 6 to 6 Shape Cross Grid Connectors are made of high conductivity ETP Garde Copper providing irreversible crimped connection between conductor to conductor or earth rod to conductor. It is suitable for direct burial application and marked with conductor size and die index for easy identification.

Learn More Learn More
6 to 8 Cross Grid Customizable
  • Add to
    Add to list

6 to 8 Cross Grid

Provides permanent crimped connection between conductor to conductor and conductor to earth rod. 6 to 8 Shape Cross Grid Connectors are made of high conductivity ETP Garde Copper providing irreversible crimped connection between conductor and earth rod. It is suitable for direct burial application and marked with conductor size and die index for easy identification.

Learn More Learn More
Bar to Bar Customizable
  • Add to
    Add to list

Bar to Bar

Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Bar to Earth Rod Customizable
  • Add to
    Add to list

Bar to Earth Rod

Copper Bar to Earth Rod Connection. Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Bar to Steel Surface Customizable
  • Add to
    Add to list

Bar to Steel Surface

Copper Bar to Steel Surface Connection . Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Standoff Insulators Customizable
  • Add to
    Add to list

Standoff Insulators

Combines high mechanical strength with high arc resistance and dielectric properties at elevated temperatures and humidity. Standoff Insulators combine high mechanical strength with high arc resistance and dielectric properties at elevated temperatures and humidity.

Learn More Learn More
Cable to Bar Customizable
  • Add to
    Add to list

Cable to Bar

Copper Cable to Copper Bar Connection . Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Cable to Cable Customizable
  • Add to
    Add to list

Cable to Cable

Copper Cable to Copper Cable. Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the whole section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Cable to Earth Rod Customizable
  • Add to
    Add to list

Cable to Earth Rod

Copper Cable to Earth Rod Connection.Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Cable to Rebar Customizable
  • Add to
    Add to list

Cable to Rebar

Copper Cable to Reinforcing Bar Connection . Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Cable to Steel Surface & Pipe Customizable
  • Add to
    Add to list

Cable to Steel Surface & Pipe

Copper Cable to Steel Surface & Pipe Connection. Exothermic welding process is a simple, efficient method of permanently bonding copper to copper or copper to steel. Exothermic connection provides permanent conductivity over the complete section due to molecular bonding between metal surfaces. Exothermic welded joint carries more tensile strength than mechanical connections.

Learn More Learn More
Exothermic Welding Powder Customizable
  • Add to
    Add to list

Exothermic Welding Powder

Produce high quality electrical connections between different metals (copper to copper / copper to steel)

Learn More Learn More
Welding Accessories Customizable
  • Add to
    Add to list

Welding Accessories

Used for igniting and initiating exothermic reaction. Welding accessories like Flint Gun, Handle Clamp, Mould Cleaning Brush, Weld Cavity Cleaning Brush, File Card Brush, Slag remover scrapper and Hand Gloves are used to securely make a joint.

Learn More Learn More